Bipolar Plasma Surgery BPH Surgery Probe Plasma Prostate Enucleation

Product Introduction

PLA201 is a bipolar plasma probe which is using with PLA-600 Urology Plasma Surgery System, into the treatment of TURP, BPH, Bladder tumor etc.. It has the function of cutting, ablation, hemostasis and coagulation.

Product Tip Picture

Product Character

• Really exfoliate along the cavity of the surgical capsule
• Block blood flow thoroughly, clear vision, clear boundaries, not easy to accidental injury
• The glands are completely removed without trimming the tip, which is not easy to cause urinary incontinence. There will be some patients with pseudo-urinary incontinence, which will return to normal within 3 months after surgery

Product Advanatages

• Safety: Compared with traditional surgical methods (such as: electric knife, laser), the current does not flow through the human body, the working surface temperature is only 40 ° C to 70 ° C, and the surrounding tissue is less thermally damaged. When used in the recommended energy range, the cutting and ablation depth is controlled to ≤50μm.
• Minimally Invasive: Compared with traditional surgical methods (such as electric knife, laser), it has less heat, reduces tissue thermal damage, reduces wound healing time, reduces wound bleeding and scar formation
• High Efficiency: Compared with traditional surgical methods (such as: electric knife, laser), the patient's pain during surgery is significantly reduced, and the incidence of postoperative inflammation is significantly reduced. During the surgery, the doctor stops bleeding while cutting, and does not need other hemostasis tools.

System Set Up

System Component

1). One tabletop generator device

2). One reusable and non-sterile power supply cable.

3). One reusable and non-sterile footswitch.

4). One reusable and non-sterile treatment handle which is for foot control.

5). Treatment probes.

Anesthesia

Epidural anesthesia is usually used. You can also choose spinal anesthesia or general anesthesia.

Cutting Principle

Relying on the mechanical kinetic energy of the plasma in the electric field, it hits the molecular bonds (40-70 ° C) of the target tissue to lyse and ablate. The thermal damage depth is less than 0.5mm, and the trauma to normal adjacent tissues is small.

Storage Condition

This device should be stored in a well-ventilated room without corrosive gas. The height above ground and the distance from wall should be above 30cm. Stack limit is 6 cases. Before being stored for a long time, it should be cleaned thoroughly for proper packing and storage. And it should also be taken out for power up every year, in order to avoid it from moisture, mildew or even damage. The suitable weather and environment condition is as below:

1. Temperature: -40℃～+55℃;

2. Relative humidity: ≤90％;

3. Atmospheric pressure: 50kPa～106kPa

Chengdu Mechan Electronic Technology Co., Ltd.

Established in 2002, Mechan Medical is a high-tech medical enterprise with the integration of R&D, manufacture and marketing. It is the pioneer of research, development and manufacturing plasma medical products in mainland China. Mechan Medical is devoted to low-temperature plasma surgery system for minimally-invasive, and our products at present cover ENT, Orthopedics, Urology, Gynecology, Ophthalmology, Anorectal, etc.

The company has listed on the new third board on August 18, 2015, wherein the stock code is 833234 and the stock abbreviation is: Mechan Medical.

We has a strong record of medical sales and service network, including 31 provinces and cities nationwide, and our products are exported to over 10 countries,including Isreal, South Korea, Saudi Arabia, Iran, Brasizl, the United Arab Emirates, Indonesia etc. We have mastered the core technology of low temperature plasma through the cooperation of Томский политехнический университет and Shenyang Ligong University, and established the company Mechan Europe in UK.

In order to make the products go better out of the country and understand the international most advanced plasma minimally invasive medical technology, we and which means our quality is accepted by the European market.

In October 2014, obtained the qualification as a hi-tech enterprise

In November 2014, CE marked

In January 2015, got invention patent of Low temperature plasma technology

In May 2015, started to apply for the international patents in America and EU

Our vision is to become a professional company taking low temperature plasma technology as core to produce minimally invasive products for whole departments, and make the low-temperature plasma technology as the must tool for surgeons .

At the same time of perfecting ENT Products, we constantly develop our products for Orthopedics, Gynecology, Urology, Ophthalmology, Digestion, Anorectal, Plastic surgery, General surgery, and so on.

Our goal is to make Chengdu Mechan the leading pioneer of the low-temperature plasma products in China, and make the Company a famous and respected medical enterprise.